PAC Requesting Approval
PAC Requested:
TL;DR: THE FIRST PAC WAS DENIED BECAUSE "THE BASE MODEL CANNOT BE CHANGED" AND IT DID NOT LOOK LIKE ERT. THE CHANGES I'VE MADE NOW ENSURE:
THE MODEL LOOKS MORE LIKE ERT, SO HOPEFULLY IT WILL BE ACCEPTED. THE CHEST RIG SAYS "ERT" IN BIG BOLD WHITE LETTERS AND THE SUIT USES A CUSTOM-MADE ERT CAMO. EXTRA FEATURES SUCH AS THE GLOWING EYE CAN EASILY BE REMOVED IN TWO CLICKS, IF YOU WOULDN'T LIKE THEM TO BE USED JUST TELL ME !
THE BASE MODEL IS AN ERT SOLDIER SO IF SOMEBODY HAS PAC3 TURNED OFF THEN THEY WILL JUST SEE A NORMAL ERT MEMBER (for proof scroll down)
After the first ERT pac was denied, I made an EVEN MORE EPIC version of it that hopefully fits with the conditions i've been made to follow. If you wanna check out the features of this pac, check the first, denied request. Here's some updated pictures:
IF YOU ARE BELOW 300HP, A "FLICKERING EYE" IS AUTOMATICALLY ACTIVATED TO SIGNIFY THAT YOU'RE CLOSE TO DEATH! THERE IS ALSO A RED TRACKING BEACON ON THE BACK, WHICH IS A SLOW-FLASHING RED LIGHT!
NOTE: THESE ARE "SPRITES" IN PAC, AND AS A RESULT THEY PRODUCE NO LIGHT! THEY WILL JUST APPEAR TOBE BRIGHT BUT WON'T ACTUALLY PROVIDE ANY COMBAT ADVANTAGES!
For people who like this kind of thing, here's some lore
ERT PROTOTYPE #AA215 was, as the name implies, a prototype developed by the fine folks in the ERT to solve the problem of their men dying so often. It features a rudimentary battle .aic within it, which works in tandem with the pilot inside of it to ensure that not only equipment isn't lost, but injured men are returned to safe areas without any outside intervention.
Similarly to how modern military systems will use old operating systems, the rudimentary .aic inside of it is hard to destroy and good at its job: RECONTAINING SCPs, and ensuring MINIMUM COLLATERAL DAMAGE. Not very good at much else though.
Sometimes, there won't even be a person manning it, with the .aic taking full control of the exoskeleton. This ensures no contagions such as SCP 008, 096, or 049 can affect it. Even if there was a pilot, however, the SCBA and advanced gas mask provide two layers of security from CBRN threats.
Changes and why I did them:
The initial model was denied because: Combative personnel may not change their base model, and this PAC does not resemble a member of the Emergency Response Team. After talking with Rushi, as I did say in the initial ERT Pac request, THE BASE MODEL STILL USES ERT, SO IF PAC IS DISABLED THEN THERE ARE NO PROBLEMS WITH DIFFERENT MODELS, proof here being in the pac itself:
I talked with Rushi to find out what I could do to get a model like this accepted, and how to go about it:
To combat this, I've made some changes to make the model more recognisable as ERT, mainly:
Firstly, the chest rig has been changed from that of the Omega-1 Enforcer to the ERT's one. The new rig has big bold text on it that says 'ERT', so from the front you can't miss that this person is part of the team.
Secondly, I've removed any unnecessary parts of the E11 Biohazard specialist (in pac this is called hazmat_loadouts_col) so that the model can't possibly be mistaken for one
Lastly, I've completely changed the skin of the model so that it uses the ERT's camouflage colours. To do this I re-used the camo generator that I used in the weapon skin competition, and sampled the colours to use from the ERT model itself.
The three colours used were: #535353 | #303030 | #0d0d0d. These are the same colours used on the model of ERT.
This was the camo pattern I used on the shirt and trousers.
PAC Requested:
TL;DR: THE FIRST PAC WAS DENIED BECAUSE "THE BASE MODEL CANNOT BE CHANGED" AND IT DID NOT LOOK LIKE ERT. THE CHANGES I'VE MADE NOW ENSURE:
THE MODEL LOOKS MORE LIKE ERT, SO HOPEFULLY IT WILL BE ACCEPTED. THE CHEST RIG SAYS "ERT" IN BIG BOLD WHITE LETTERS AND THE SUIT USES A CUSTOM-MADE ERT CAMO. EXTRA FEATURES SUCH AS THE GLOWING EYE CAN EASILY BE REMOVED IN TWO CLICKS, IF YOU WOULDN'T LIKE THEM TO BE USED JUST TELL ME !
THE BASE MODEL IS AN ERT SOLDIER SO IF SOMEBODY HAS PAC3 TURNED OFF THEN THEY WILL JUST SEE A NORMAL ERT MEMBER (for proof scroll down)
After the first ERT pac was denied, I made an EVEN MORE EPIC version of it that hopefully fits with the conditions i've been made to follow. If you wanna check out the features of this pac, check the first, denied request. Here's some updated pictures:
IF YOU ARE BELOW 300HP, A "FLICKERING EYE" IS AUTOMATICALLY ACTIVATED TO SIGNIFY THAT YOU'RE CLOSE TO DEATH! THERE IS ALSO A RED TRACKING BEACON ON THE BACK, WHICH IS A SLOW-FLASHING RED LIGHT!
NOTE: THESE ARE "SPRITES" IN PAC, AND AS A RESULT THEY PRODUCE NO LIGHT! THEY WILL JUST APPEAR TOBE BRIGHT BUT WON'T ACTUALLY PROVIDE ANY COMBAT ADVANTAGES!
For people who like this kind of thing, here's some lore
ERT PROTOTYPE #AA215 was, as the name implies, a prototype developed by the fine folks in the ERT to solve the problem of their men dying so often. It features a rudimentary battle .aic within it, which works in tandem with the pilot inside of it to ensure that not only equipment isn't lost, but injured men are returned to safe areas without any outside intervention.
Similarly to how modern military systems will use old operating systems, the rudimentary .aic inside of it is hard to destroy and good at its job: RECONTAINING SCPs, and ensuring MINIMUM COLLATERAL DAMAGE. Not very good at much else though.
Sometimes, there won't even be a person manning it, with the .aic taking full control of the exoskeleton. This ensures no contagions such as SCP 008, 096, or 049 can affect it. Even if there was a pilot, however, the SCBA and advanced gas mask provide two layers of security from CBRN threats.
Changes and why I did them:
The initial model was denied because: Combative personnel may not change their base model, and this PAC does not resemble a member of the Emergency Response Team. After talking with Rushi, as I did say in the initial ERT Pac request, THE BASE MODEL STILL USES ERT, SO IF PAC IS DISABLED THEN THERE ARE NO PROBLEMS WITH DIFFERENT MODELS, proof here being in the pac itself:
I talked with Rushi to find out what I could do to get a model like this accepted, and how to go about it:
To combat this, I've made some changes to make the model more recognisable as ERT, mainly:
Firstly, the chest rig has been changed from that of the Omega-1 Enforcer to the ERT's one. The new rig has big bold text on it that says 'ERT', so from the front you can't miss that this person is part of the team.
Secondly, I've removed any unnecessary parts of the E11 Biohazard specialist (in pac this is called hazmat_loadouts_col) so that the model can't possibly be mistaken for one
Lastly, I've completely changed the skin of the model so that it uses the ERT's camouflage colours. To do this I re-used the camo generator that I used in the weapon skin competition, and sampled the colours to use from the ERT model itself.
The three colours used were: #535353 | #303030 | #0d0d0d. These are the same colours used on the model of ERT.
This was the camo pattern I used on the shirt and trousers.
Last edited:
